Note: Need to modify the corresponding Dio1.xMode to the required type
For example:using Dio1.1 for level acquisition
Must be set:Dio1.1Mode = DigitalInput<br>
For example:using Dio1.1 for level output
Must be set:Dio1.1Mode = DigitalOutput

Name	Read\|Write	Available Value	Factory Value	Remark
DioList	Read	Dio1.1,Dio1.2,Dio1.3,Dio1.4		List of available DIO devices
Dio1Data	Read\|Write	0~15	15	Dio data value bit0: Dio1.1 data value bit1: Dio1.2 data value bit2: Dio1.3 data value bit3: Dio1.4 data value
Dio1.1Data	Read\|Write	0,1	1	Dio1.1 data value 0: Low level 1: High level
Dio1.1Mode	Read\|Write	DigitalInput,DigitalOutput,Pwm	DigitalInput	Dio1.1 mode DigitalInput: Dio1.1 used for level input, pulse counting, etc DigitalOutput: Dio1.1 used for level output Pwm: Dio1.1 used for pulse width modulation output
Dio1.2Data	Read\|Write	0,1	1	Dio1.2 data value 0: Low level 1: High level
Dio1.2Mode	Read\|Write	DigitalInput,DigitalOutput,Pwm	DigitalInput	Dio1.2 mode DigitalInput: Dio1.2 used for level input, pulse counting, etc DigitalOutput: Dio1.2 used for level output Pwm: Dio1.2 used for pulse width modulation output
Dio1.3Data	Read\|Write	0,1	1	Dio1.3 data value 0: Low level 1: High level
Dio1.3Mode	Read\|Write	DigitalInput,DigitalOutput	DigitalInput	Dio1.3 mode DigitalInput: Dio1.3 used for level input DigitalOutput: Dio1.3 used for level output
Dio1.4Data	Read\|Write	0,1	1	Dio1.4 data value 0: Low level 1: High level
Dio1.4Mode	Read\|Write	DigitalInput,DigitalOutput	DigitalInput	Dio1.4 mode DigitalInput: Dio1.4 used for level input DigitalOutput: Dio1.4 used for level output