Note: Need to modify the corresponding Dio1.xMode to the required type
For example:Use Pwm1
Must be set:Dio1.1Mode = Pwm
Set PWM duty cycle: Pwm1DutyCycle = 0.5
Set PWM carrier frequency: Pwm1CarrierFrequency = 10

Name	Read\|Write	Available Value	Factory Value	Remark
PwmList	Read	Pwm1,Pwm2		List of available Pwm devices
Pwm1CarrierFrequency	Read\|Write	20.000~1000000.000	20.000	Pwm1 carrier frequency output
Pwm1DutyCycle	Read\|Write	0.000~1.000	1.000	Pwm1 duty cycle output from Dio1.1
Pwm2CarrierFrequency	Read\|Write	20.000~1000000.000	20.000	Pwm2 carrier frequency output
Pwm2DutyCycle	Read\|Write	0.000~1.000	1.000	Pwm2 duty cycle output from Dio1.2