Note: VP8384 Channel list:
AIN1:4
MIN1:2
DIN1
AOUT1:2

Name	Applicable channels	Read\|Write	Available Value	Factory Value	Unit	Remark
AccelSensitivity	AIN1:4	Read\|Write		0.05		Acceleration sensor sensitivity
Bandwidth	AIN1:4	Read		26170	Hz	At the current sampling rate, the corresponding bandwidth
FilterType	AIN1:4	Read\|Write	Wideband,Sinc	Sinc		Wideband: Wideband digital filter Sinc: Sinc digital filter
InputRange	AIN1:4	Read\|Write	0~10.00000000	10.00000000	V	Input range
InputType	AIN1:4	Read\|Write	Differential,SingleEnded, IEPE,Current	Differential		Differential: Differential voltage input SingleEnded: SingleEnded voltage input IEPE: IEPE input Current: Current input Tip: Due to hardware differences at the input end, the supported input types are. Please read the channel property: InputTypeAvailable
Raw	AIN1:4 MIN1:2 DIN1 AOUT1:2	Read Read Read Read				AIN1:4 raw value MIN1:2 raw value DIN1 raw value AOUT1:2 raw value
Rsense	AIN1:4	Read		250	Ω	The resistance of the sampling resistor is only applicable to current input type
SamplingSize	AOUT1:2	Read\|Write	0~4294967295	4294967295		4294967295: Continuous Acquisition 0~4294967294: Finite Acquisition
ScaleDivisor	AIN1:4 AOUT1:2	Read Read		1.953125000 305.17578125		AIN1:4 Scale divisor AOUT1:2 Scale divisor
ScaleMultiplier	AIN1:4 AOUT1:2	Read Read		1000000 1000000		AIN1:4 Scale multiplier AOUT1:2 Scale multiplier
TriggerLevel	AIN1:4 MIN1:2	Read\|Write	AIN:-10.00000000~10.00000000 MIN:0~4294967295	AIN:0.00000000 MIN:0	V	AIN1:4 Analog trigger voltage value MIN1:2 Trigger value
VirtualCounter	AOUT1:2	Read\|Write	0~4294967295	0		Read: Returns the virtual counter value Write: Writes any value to clear the virtual counter value
VirtualTimerInterval	AOUT1:2	Read\|Write	0~4294967295		sec	Virtual timer interval
VirtualTimerValue	AOUT1:2	Read\|Write		0	sec	Virtual timer value
Voltage	AIN1:4 AOUT1:2	Read Read			V V	Voltage Voltage
Waveout	AOUT1:2	Read\|Write	Disable,Enable	Enable		Disable: AOUT1:2 Disable wave out Enable: AOUT1:2 Enable wave out
Source	MIN1:2	Read\|Write	VirtualCounter, Counter1,Counter2,Counter3,Counter4, Encoder1,Encoder2	VirtualCounter		MIN1:2 Data source selection VirtualCounter: Virtual counter value Counter1: Dio1.1 input pulse count value Counter2: Dio1.2 input pulse count value Counter3: Dio1.3 input pulse count value Counter4: Dio1.4 input pulse count value Encoder1: Count value of rotary encoder 1 connected to Dio1.1 and Dio1.2 Encoder2: Count value of rotary encoder 2 connected to Dio1.3 and Dio1.4