libvkdaq: System Attributes

libvkdaq

VKINGING DAQ Library API Reference

Loading...

Searching...

No Matches

Name	Read\|Write	Available Value	Factory Value	Unit	Remark
DeviceMode	Read\|Write	Slave,Master	Master		Slave: Collect an AIN data point when receiving the rising edge of the Sync pulse Master: Outputs a pulse from Sync for each AIN data point acquired For multi-card synchronous acquisition: One card is set as Master to output synchronization pulses, and the other cards are set as Slave to receive synchronization pulses For external clock acquisition: Set as Slave
DeviceStatus	Read	Unavailable,Available	Available		Check if the device is available
Eth0Status	Read	Determined by the actual connection situation			Read examples: negotiated 1000baseT-FD flow-control, link ok negotiated: determine the connection parameters through automatic negotiation 1000baseT-FD: Gigabit Ethernet full-duplex mode flow-control: enable flow control link ok: the network connection is normal
Hostname	Read\|Write		daq-vk815n-081125		Hostname
InternalTemp	Read				Read the internal temperature in Celsius ℃
MachineId	Read				A string of 32 HEX characters. Each acquisition card has a unique machine ID.
MemInfo	Read				Memory usage: Total memory/available memory
Model	Read	VP8388			Model
Network	Read\|Write	Determined by the actual connection situation			Read examples: dhcp,ip=192.168.1.199,gateway=192.168.1.1,netmask=255.255.255.0,mac=c8:d8:f9:00:03:63 static,ip=192.168.1.199,gateway=192.168.1.1,netmask=255.255.255.0,mac=c8:d8:f9:00:03:63 Write examples: dhcp dhcp,mac=c8:d8:f9:00:03:63 static,ip=192.168.1.222,gateway=192.168.1.1,netmask=255.255.0.0 static,ip=192.168.1.222,gateway=192.168.1.1,netmask=255.255.0.0,mac=c8:d8:f9:00:03:63
SystemTime	Read\|Write	YYYY-MM-DD hh:mm:ss			System time
UsbOtgStatus	Read	Host,Device			Usb Otg Status
Version	Read				AIN firmware version
Vref	Read		4.096	V	AIN reference voltage